When it comes to tire molds, many manufacturers are also more troublesome, because to produce good quality tires, tire molds need to be cleaned regularly, so what is the appropriate way to clean tire molds? A more suitable cleaning method should be able to choose a dry ice cleaning machine.

The mold is an important tool for tire manufacturers. The mold will be more or less exposed to the residue of rubber, compounding agent and release agent during use. Repeated use will affect the tolerance of the tire, so cleaning the tire mold can Ensure the cleanliness of the tire surface and the quality of the tire. Therefore, the development of tire mold cleaning technology has attracted the attention of the industry

At present, there are generally three ways to clean tire molds:

1. Chemical cleaning is the use of pickling and solvent to clean tire molds. This cleaning method is simple and convenient, and the cost is low, but long-term use will cause corrosion of the mold, affecting the appearance and quality of the product. Chemicals also have certain harm to cleaning personnel. .

2. Mechanical equipment cleaning is to use manual abrasive cloth or steel wire for physical grinding and dry cleaning. Different cleaning can be selected according to needs. Because the sandblasting medium is relatively hard and has a certain degree of abrasiveness, it has certain damage to the tire mold and will shorten the time. The life of the mold, sand is easy to block the mold exhaust hole, it is also difficult to clean the air hole in the later stage, and the cleaning cycle is relatively long.

3. Dry ice cleaning of tire molds: Since the working principle of the dry ice cleaning machine is to use the strong pressure gas of the air compressor to spray the dry ice particles to the dirt surface, the whole cleaning is dry cleaning, no shutdown is required, and the production efficiency is not affected. The cleaning process does not produce chemical The residue is not harmful to the cleaning personnel, the cleaning cost is low, the production efficiency of the tire manufacturer is improved, and the problem of the blockage of the exhaust hole of the tire mold is solved.