Cavity: The mold cavity that constitutes the contour of the tire mold product

Centripetal mechanism: a group of parts that form the mold shell and drive the opening and closing of the pattern blocks

Blocks: Model parts for tire tread pattern vulcanization

Sidewalls: Model parts vulcanized on the side of the tire and its logotype

Steel rim: model parts of the tire rim that are shaped and vulcanized

Parting surface: the contact surface between the pattern block and the pattern block, the contact surface between the pattern block and the sidewall plate

Slider: a mold part used to carry the pattern block and transmit the power from the middle mold sleeve during the mold opening and closing process

Middle die sleeve: The combination of parts that transmits power from the vulcanizer and drives the die

Anti-friction plate: a special material part that reduces the friction of each sliding part of the mold

Steam chamber: a cavity structure set in the middle mold sleeve and the upper and lower hot plates by passing steam and heating the mold

Conical surface structure: a structure guided by the inner conical surface and generating sufficient clamping force to drive the mold cavity to close and open

Inclined plane structure: a structure guided by the inner inclined plane and generating sufficient clamping force to drive the mold to close and open

Revolving mold: The radial opening and closing of each block is driven by the centripetal mechanism, which is an integral part of the cavity and the centripetal mechanism.

If you need tire mold,please contact with us.